Melt Pressure Transducer

Description

PT124G-113/113T Series Melt Pressure Transducer( rigid stem & sanitary) can measure the pressure and temperature in one point, which can be widely used in Medicine & Food process equipment. The model PT124G-113T is with thermocouple. Zero & span can be adjustable; with amplified signal can be connected with PLC. It has the advantages of high precision and reliable, good quality, internal 80% calibration.

Specifications
Pressure range: 0-1MPa…0-150MPa(0-150psi…0-20000psi)
Over Pressure: 1.5 X FSO
Combined Error: ±0.5% FSO, ± 1.0% FSO (Including Linearity, Repeatability & Hysteresis)
Output: 3.33 mV/V, 2mV/V
Input Voltage: 10VDC
Repeatability: +/- 0.2%FSO
Bridge Resistance: Input: 345 Ohms minimum
Output: 350 Ohms +/- 10%
Internal Shunt Calibration (R-Cal): 80% FSO +/- 1%
Insulation Resistance: 200 megohms @ 100 Vdc
Max Diaphragm Temperature: 260℃
Mounting Torque: 500 inch/lbs. maximum
Standard Wetted Parts: Diaphragm coated 15-5 PH SST
Process connector: 1/2″-20UNF, M14×1.5, M18×1.5 Optional

PT124G-113/113T.pdf