Axle weighing scale In China

Contact Us

  • Shanghai Zhaohui Pressure Apparatus Co., Ltd.
  • 5 / 6F,building 8#, NO. 115, Lane 1276, Nanle Road, Songjiang District, Shanghai, China
  • +86-21-67755188 67755189
  • +86-21-67755185
  • +86-15021723851
  • http://www.zhyqsensor.com

Axle weighing scale

  • Model: ZH180H
  • Application Double layer structure is used in ZH180E the bottom layer is made of aluminum alloy and top layer is made of stainless steel. So the deformation caused by overload is effectively reduced

Description:

Description
Double layer structure is used in ZH180E the bottom layer is made of aluminum alloy and top layer is made of stainless steel. So the deformation caused by overload is effectively reduced. The length of slope is long up to 3.5 meters, so the dynamic accuracy can be less than 1% FS while the vehicle speed is less than 5km/h. With full sealed structure it can meet Ip68 standard.Double layer structure can effectively increase the whole intensity and anti-fatigue performance.

Parameters
Rated load: 30t
Rated output: 1.0±0.1mv/v
Repeatability: 0.05%FS
Error on transverse: 0.1%FS
Zero balance: ≤1%FS
Static comprehensive error: 0.2~0.5%FS
Dynamic comprehensive error: 1.0%FS(1~5km/h)  3~5%FS(5~10km/h)
Non-linearity: 0.2%FS
Use temp.range: -30~80℃
Compensated temp.range: -10~50℃
Temp.effect on span: 0.03%FS/10℃
Temp.effect on zero: 0.05%FS/10℃
Output resistance: 1200±5Ω
Defend grade : IP 68
Ultimage overload: 150%FS
Recommended voltage: 10V
Excitation voltage: 9~15V
Net weight: 45kg
Max load of 1 /4 weigh bridge: 10t
Full load: 30t
Dimension of the surface: 1000×500mm
Insulation resistance: ≥5000MΩ(100VDC)
Remark: Four-core shielded cable is attached: φ5.8×20m
(The cable length can be changed according to customer's request)