Axle weighing scale In China

Contact Us

  • Shanghai Zhaohui Pressure Apparatus Co., Ltd.
  • 5 / 6F,building 8#, NO. 115, Lane 1276, Nanle Road, Songjiang District, Shanghai, China
  • +86-21-67755188 67755189
  • +86-21-67755185
  • +86-15021723851
  • http://www.zhyqsensor.com

Axle weighing scale

  • Model: ZH180A3
  • Application Doable-layer structure is used in ZH108A3. The top layer is made of stainless steel, and the bottom layer is made of aluminum alloy

Description:

Description
Doable-layer structure is used in ZH108A3. The top layer is made of stainless steel, and the bottom layer is made of aluminum alloy. Four parallel-beam sensors are used to strengthen the ability to with stand overload; Compared with other products of the same type, the calibration of ZH180A3 can be more easily fulfilled.ZH-180A3 can be used for auto car manufacturer to check the auto car weight.

Parameters
Rated load:0.5t/1t/2t/5t
Rated output:1.0±0.1mv/v
Non-linearity:0.1%FS
Repeatability:0.05%FS
Error on transverse: 0.1%FS
Zero balance:0~3%FS
Static comprehensive error: 0.1%FS
Use temp.range:-30~80℃
Compensated temp.range:-10~50℃
Temp.effect on span:0.03%FS/10℃
Temp.effect on zero:0.05%FS/10℃
Output resistance:87±3Ω
Defend grade :IP 67
Ultimage overload:150%FS
Recommended voltage:10V
Excitation voltage:9~15V
Net weight:60kg
Max load of 1 /4 weigh bridge:
0.3t/0.6t/1t/1.5t/2.5t
Full load:0.5t/1t/2t/3t/5t
Dimension of the surface:
1100×700mm
Remark:Four-core shielded
cable is attached:φ5.5×10m
(The cable length can be changed according to customer's request)