PT124G-113T Series sanitary melt pressure transducer comes with thermocouple, it can measure the pressure and temperature at one point. This product built in 80% shunt calibration, it can match the N series pressure instrument from ZHYQ, also can match the pressure instrument or controller of other brand. This product filled with environmental, avirulent medium. If the diaphragm damaged during process, the leaking medium is no harm to the human body or ambient. With the advantages of exact and reliable measurement, high performance, no harm, it is widely used in the domestic and abroad.
It has the wide application in medicine & food process equipment, drinking water environmental monitoring and etc.
Pressure range: 0-10MPa…0-150MPa (0-1500psi…0-20000psi)
Over Pressure: 1.5 X FSO
Combined Error: ± 1.0% FSO (Including Linearity, Repeatability & Hysteresis)
Output: 3.33 mV/V, 2mV/V
Input Voltage: 10VDC
Repeatability: +/- 0.2%FSO
Bridge Resistance: Input: 345 Ohms minimum
Output: 350 Ohms +/- 10%
Internal Shunt Calibration (R-Cal): 80% FSO +/- 1%
Insulation Resistance: 200 megohms @ 100 Vdc
Max Diaphragm Temperature: 260℃
Mounting Torque: 500 inch/lbs. Max.
Standard Wetted Parts: Diaphragm coated 15-5 PH SST
Thermocouple type: J, K, E, PT100 optional
Electrical connector: 5PIN, 6PIN
Process connector: 1/2″-20UNF, M14×1.5, M18×1.5 Optional