PT124G-116 Series Melt Pressure Transducer( rigid stem & flange type) can measure the pressure and temperature in one point. It adopts special construction design and excellent alloy elastic membrane to reduce the thermal draft and improve measurement accuracy. Zero & full span can be adjustable; with amplified signal can be connected with PLC, which is the international standard.
It has wide application of pressure measurement & control for melt-temp liquid for chemical and fiber equipment, polyester equipment and etc.
Over Pressure: 1.5 X FSO
Combined Error: ± 0. 5% FSO (Including Linearity, Repeatability & Hysteresis)
Output: 3.33 mV/V, 2mV/V
Input Voltage: 10VDC
Repeatability: +/- 0.2%FSO
Bridge Resistance: Input: 345 Ohms minimum
Output: 350 Ohms +/- 10%
Internal Shunt Calibration (R-Cal): 80% FSO +/- 1%
Insulation Resistance: 200 megohms @ 100 Vdc
Max Diaphragm Temperature: 350℃
Mounting Torque: 500 inch/lbs. maximum
Standard Wetted Parts: Diaphragm coated 15-5 PH SST
Process connector: Flange mounting