Melt Pressure Transducer In China

Contact Us

  • Shanghai Zhaohui Pressure Apparatus Co., Ltd.
  • 5 / 6F,building 8#, NO. 115, Lane 1276, Nanle Road, Songjiang District, Shanghai, China
  • +86-21-67755188 67755189
  • +86-21-67755185
  • +86-15021723851
  • http://www.zhyqsensor.com

Melt Pressure Transducer

  • Model: PT124G-128
  • Application 1,Chemical fiber Equipment 2,Polyester equipment 3,Other pressure measurement and control

Description:

Description
PT124G-128 Series melt pressure transducer is ideal for space restricted areas applications required, where mounting space is limited. It also has a free-spinning jam nut that simplifies installation. The PT124G comes equipped with six or eight pin bendix connector. It can be interchangeable with the similar world standard products. It is suitable to measure and control the melt pressure in chemical fiber equipment, rubber and plastic machine and so on.
capillary melt pressure transducer

Specifications:
Pressure range: 0-3.5MPa…0-150MPa(0-500psi…0-20000psi)
Over Pressure: 1.5 X FSO
Combined Error: ± 0.5% FSO  (Including Linearity, Repeatability & Hysteresis)
Output: 3.33 mV/V, 2mV/V
Input Voltage: 10VDC
Repeatability: +/- 0.2%FSO
Bridge Resistance: Input: 345 Ohms minimum
Output: 350 Ohms +/- 10%
Internal Shunt Calibration (R-Cal): 80% FSO +/- 1%
Insulation Resistance: 200 megohms @ 100 Vdc
Max Diaphragm Temperature: 350℃
Mounting Torque: 500 inch/lbs. maximum
Standard Wetted Parts: Diaphragm coated 15-5 PH SST
Process connector: 1/2″-20UNF, M14×1.5, M18×1.5 Optional