Melt pressure transmitter In China

Contact Us

  • Shanghai Zhaohui Pressure Apparatus Co., Ltd.
  • 5 / 6F,building 8#, NO. 115, Lane 1276, Nanle Road, Songjiang District, Shanghai, China
  • +86-21-67755188 67755189
  • +86-21-67755185
  • +86-15021723851

Melt pressure transmitter

  • Model PT124B-112T



The model PT124B-112T comes with thermocouple, it can achieve the pressure and temperature measuring at one point. This series adopt special material and alloy elastic membrane to low down temperature draft and improve accuracy. The zero & full span can be calibrated, with amplify signal be connected with PLC, and internal 80% calibration. It has the wide application in high-temp liquid pressure measurement and control such as Chemical & Fiber equipment, polyester equipment, etc.


It can be widely used in various plastic extrusion lines for pressure measuring and control, such as chemical fiber manufacturing equipment, plastic rubber machine, polyester equipment and petrochemical.


Pressure range: 0-10MPa…0-150MPa (0-1500psi…0-20000psi)

Over Pressure: 1.5 X FSO

Combined Error: ± 0.5% FSO (Including Linearity, Repeatability & Hysteresis)

Output: 4-20mA, 0-10V, 0-5V

Input Voltage: 24VDC

Repeatability: +/- 0.2%FSO

Internal Shunt Calibration (R-Cal): 80% FSO +/- 1%

Insulation Resistance: 200 megohms @ 100 Vdc

Max Diaphragm Temperature: 350

Mounting Torque: 500 inch/lbs. Max.

Standard Wetted Parts: Diaphragm coated 15-5 PH SST

Electrical connector: 6PIN connector

Process connector: 1/2″-20UNF, M14×1.5, M18×1.5 Optional