The model PT124B-123T comes with thermocouple, which can measure the pressure and temperature at one point. This product built in amplifier circuit board and 80% shunt calibration, zero and span adjustable, and the output signal can input PLC directly. And it can match the N series pressure instrument from ZHYQ, also can match the pressure instrument or controller of other brand. This product has advantage of stability and repeatability, good anti-jamming performance. This series product is widely used in the domestic and abroad.
It can be widely used in various plastic extrusion lines for pressure measuring and control, such as chemical fiber manufacturing equipment, plastic rubber machine, polyester equipment and petrochemical.
Pressure range: 0-10MPa…0-150MPa (0-1500psi…020000psi)
Over Pressure: 1.5 X FSO
Combined Error: ± 0.5% FSO (Including Linearity, Repeatability & Hysteresis)
Output: 4-20mA, 0-10V, 0-5V
Input Voltage: 24VDC
Repeatability: +/- 0.2%FSO
Bridge Resistance: Input: 345 Ohms minimum
Output: 350 Ohms +/- 10%
Internal Shunt Calibration (R-Cal): 80% FSO +/- 1%
Insulation Resistance: 200 megohms @ 100 Vdc
Max Diaphragm Temperature: 350℃
Mounting Torque: 500 inch/lbs. Max.
Standard Wetted Parts: Diaphragm coated 15-5 PH SST
Electrical connector: 6PIN connector
Process connector: 1/2″-20UNF, M14×1.5, M18×1.5 Optional